192 193 L + 50 mm Ø + 50 mm L Ø Long Life Carbide CV/HCS Bi-Metal Diamond 1.5 tpi 3 tpi 6 tpi 8 tpi 10 tpi 10/14 tpi 14 tpi 18 tpi 24 tpi 32 tpi Diamond Carbide DOUBLE TEETH Blade length : material thickness + 50 mm ◘ Always keep 2 or 3 teeth in the material. CHOICE OF BLADE MATERIAL / APPLICATION CHOICE OF TEETH / APPLICATION CHOICE OF SAW LENGTH GLOSSARY PICTOGRAM Clean cutting Rough cutting Long life Perpendicular cutting Scribe Reversed teeth High-speed cutting FAST CUT AND CLEAN ◘ The perfect aligned teeth allows a fast, precise and straight cut. ◘ The conical body of the blade leaves a gap between material and blade. Because of the gap, the chips get off and the blade cuts fast. FAST AND ROUGH CUT ◘ The sharpened teeth cut the wood fibres that warranties a high speed cut especially adapted to wood cutting. FAST AND ROUGH CUT ◘ The milled and side set teeth cut roughly with high speed in wood, aluminium, non-ferrous metals and plastics. CLEAN AND THIN CUT ◘ The milled and wavy set teeth keep contact with the material to cut, avoiding jerks and allowing thin and straight cut in thin material boards. Grinded (or sharpened) teeth, conically ground blade. Grinded (or sharpened) and side set teeth. Milled and side set teeth. Milled and wavy set teeth. Regular toothing On Pull Reverse toothing On Push Very clean and splinterproof surface cut KIND OF TOOTHING TEETH DIRECTION Ideal for curved cutting
RkJQdWJsaXNoZXIy NTYxNjk=